Bass cabinets
From ShawnReevesWiki
Revision as of 12:05, 24 June 2012 by Shawn (talk | contribs) (→Contenders: subwoofers a separate category.)
I'm searching for a bass cabinet to replace, improving, a Peavey TKO 115.
Desired specifications
I'd like it to work with both electric bass and a subwoofer channel after a 180Hz crossover, so it should have at least good sensitivity between 30Hz and 180Hz.
Bass cabinets
A cabinet made for electric bass will handle the full range of frequencies coming from a bass, unlike subwoofers (see below) that won't play anything over 200Hz without mud.
- Ampeg PF115HE
- $400
- Rugged 15mm poplar ply enclosure
- Power Handling: 450 Watts RMS at 8 ohms
- Speaker: 1 x 15 inch ceramic Eminence LF driver
- Compression driver: 1 inch HF compression driver with L-Pad level control
- Frequency response: 50 Hz - 17 kHz
- Sensitivity: 99.5 dB SPL at 1w/1m
- Dimensions(HxWxD): 23 x 21 x 14.3 inches
- Weight: 45 lbs / 20.4 kg
- Ampeg Portaflex PF210HE
- $400
- Rugged 15mm poplar ply enclosure
- Power: 450 watts RMS at 8 ohms
- Speakers: 2 x 10 ceramic Eminence LF drivers
- High Frequency: 1 inch HF compression driver with L-Pad level control
- Frequency response: 53 Hz - 17 kHz
- Sensitivity: 99.6 dB SPL at 1w/1m
- Dimensions(HxWxD): 23 x 21 x 14.3 inches
- Weight: 48 lbs / 21.6 kg
- Ampeg PN-210HLF PRO NEO
- $880
- 550 watts RMS power handling at 8 ohms
- 1-inch Eminence APT:50 HF dariver w/L-Pad level control
- Frequency response: 45Hz - 18kHz
- Max SPL: 125dB
- Sensitivity: 98dB
- Rugged 15mm birch enclosure with paint and splatter coating
- Durable powder-coated metal grille
- Connections: Parallel 1/4 Inch and Speakon
- Weight: 44 lbs
- Fender Rumble 2x8
- $400
- 500 W peak, 250 W continuous
- Piezoelectric tweeter
- 8 ohm
- Weight: 22 lbs
- Dimensions: 20 x 13 x 19 in
- Genz Benz Focus-LT FCS-210T
- $429.
- Power Handling RMS: 300 W
- Frequency +/-/ 10db: 45-18K Hz
- Sensitivity 1W/1M: 97 dB
- Nominal Impedence: 8 ohm
- Crossover Point: 5K Hz
- Weight: 43 lbs
- Dimensions HxWxD: 18 x 23 1/4 x 16 1/4 in.
- SWR golight Junior 2x10
- $650
- 8 ohm
- Connections: Parallel Speakon and 1/4 inch
- Speakers: (2) 10 inch Custom-Designed SWR Neodymium Drivers Manufactured by Eminence(r), P/N 0078014000, (1) Foster(r) Horn, P/N 0048847000
- Controls: High Frequency Attenuator
- Covering: Grey Ozite Carpet Covering with Black Stamped Steel Vibration-Free Grille
- Weight: 38 lbs. (17.2 kg)
- Dimensions: Height: 15.75" (40 cm),
- Width: 23" (58.42 cm),
- Depth: 16.5" (41.91)
- Power Handling: 400 Watts RMS
- Frequency Response: 105 dB SPL @ 1W1M (-3dB @ 45Hz and 15KHz)
Subwoofers
A dedicated subwoofer, with very large speakers, will have a flatter response between 30Hz and ~200Hz, so will handle kick drums and other very low frequency sounds better than an amp for electric bass.
- JBL SRX718S
- $800
- 20 mm threaded pole socket for solid, secure satellite speaker mounting
- Frequency Range (-10 dB): 31 Hz - 220 Hz
- Frequency Response (±3 dB): 34 Hz - 220 Hz
- Power Rating (Continuous/Program/Peak): 800 W / 1600 W / 3200 W
- Dimensions (H x W x D): 20.0" x 23.5" x 29.5"
- Net Weight: 79 lbs